Home  ›  Failed to Lock Variable " for Read Access With Error 0xc0010001 the Variable Cannot Be Found

Failed to Lock Variable " for Read Access With Error 0xc0010001 the Variable Cannot Be Found

Written By Wednesday, March 2, 2022 Add Comment Edit

SP Wink Tool is a flashing application that helps to accept a backup of your device's firmware or flash the firmware dorsum to your device. It is compatible with the MediaTek powered devices and works with almost all the MediaTek Devices like Smartphones, Smartwatches, etc. Tough the application is unproblematic to apply, but information technology throws many errors without the proper data. So, today we are going to share the listing of SP Flash Tool errors (BROM Errors) and give their meanings and solutions to fix them. Nosotros have covered virtually all the SP Wink Tool errors on this page, and if nosotros take missed whatever, then you can postal service them in the comment section beneath.

Complete List of SP Flash Tool Error Codes and their Meanings and Solutions

So, let's now go on to fix SP Flash Tool or Fix BROM Errors on your PC.

Table of Contents

  • ane How to Set up SP Wink Tool Errors (BROM Mistake Codes):
    • i.1 SP Wink Tool Failed to enumerate COM Port
    • 1.2 The device automatically disconnects during flashing
    • 1.iii SP Flash Tool remains at 0%
    • one.4 Error: Initialize scatter file failed. Please check the scatter file proper noun y'all load is legal
    • 1.5 Fault: USB device not recognized
    • 1.6 Error: Delight select i ROM at least before execution
    • 1.7 Error: PRO_INFO: Failed to get PMT info
    • 1.eight Error 1002: S_INVALID_ARGUMENTS
    • ane.9 Mistake 1012: BROM Error: S_NOT_ENOUGH_MEMORY (1012)
    • i.10 Fault 1003: S_COM_PORT_OPEN_FAIL (1003)
    • i.11 Error 1013: BROM Mistake: S_COM_PORT_OPEN Neglect (1013)
    • 1.12 Error 1011: S_NOT_ENOUGH_STORAGE_SPACE
    • one.13 Error 1022:
    • 1.14 Error 1040: S_UNSUPPORTED_OPERATION (1040)
    • 1.15 Error 1042: BROM ERROR: S_TIMEOUT (1042)
    • 1.xvi Fault ii: BROM Error: ?? (two)
    • 1.17 Error 4008: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
    • 1.xviii Error 2004: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
    • one.19 Error 2005: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
    • 1.20 Error 2020: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
    • 1.21 Error 3001: S_DA_EXT_RAM_ERROR
    • ane.22 Error 3012: NAND_FLASH_NOT_FOUND
    • 1.23 Error 3140: BROM ERROR: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED
    • 1.24 Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)
    • 1.25 Error 3149: BROM Error : S_DA_SDMMC_WRITE_FAILED (3149)
    • 1.26 Error 3168: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3168)
    • 1.27 Error 3182: BROM Error: S_STORAGE_NOT_MATCH (3182)
    • ane.28 Error 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)
    • ane.29 Mistake 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)
    • 1.30 Fault 4001: S_FT_DA_NO_RESPONSE or Da didn't ship response information to Flash Tool
    • i.31 Mistake 4004: Driver Fault
    • one.32 Error 4009: S_FT_READBACK_FAIL (4009)
    • one.33 Error 4010: BROM ERROR : S_FT_FORMAT_FAIL
    • 1.34 Fault 4017: BROM Error: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)
    • 1.35 Error 4032: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
    • 1.36 Fault 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL
    • i.37 Error 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
    • ane.38 Mistake 5002: S_INVALID_DA_FILE
    • 1.39 Error 5007: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
    • 1.40 Mistake 5054: BROM Fault S_DL_GET_DRAM_SETTINGS_FAIL (5054)
    • 1.41 Error 5069: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
    • 1.42 Error 5056: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5056)
    • i.43 Mistake 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR
    • 1.44 Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)
    • 1.45 Fault 6010: BROM Fault: SP FLASHTOOL ERROR 6010 Lawmaking DOWNLOAD FORBIDDEN
    • 1.46 Error 6012: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR Lawmaking: 0X00
    • one.47 Mistake 6047: BROM Error: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL
    • 1.48 Error 6124: BROM Error: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR Lawmaking: 0X00
    • 1.49 Error 8038: Error 8038! Android download pmt is ready, and layout has been inverse / PMT changed for the ROM
    • 1.l Error 8100:
    • 1.51 Mistake 8200:
    • one.52 Error 8406: SP Wink TOOL ERROR (8406)
    • i.53 Error 8417: BROM Error: Initialize scatter file failed. Delight check the scatter file name y'all load is legal
    • 1.54 Stuck at Download DA 100%
    • 1.55 SP Wink Tool flashing procedure was successful, merely the telephone'due south calibration doesn't work
    • 1.56 USB device not recognized
    • 1.57 Fault 0xFDA: BROM Error: S_FT_GET_MEMORY_FAIL (0xFDA)
    • one.58 Error 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
    • 1.59 Error 0x3: BROM Mistake:?? (0x3)
    • 1.60 Mistake 0x7D4: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
    • one.61 Error 0x8: BROM ERROR:?? (0x8)
    • 1.62 Error OXFC0: BROM Mistake S_FT_ENABLE_DRAM_FAIL (OXFC0)
    • 1.63 Mistake 0X411: BROM Error: S_CHKSUM_ERROR (0X411)
    • 1.64 Error 0xFA1: BROM ERROR: S_FT_DA_NO_RESPONSE (0xFA1)
    • 1.65 TOOL DL image Neglect!
    • 1.66 Error 0xFC0: BROM ERROR: S_FT_ENABLE_DRAM_FAIL (0xFC0)
    • 1.67 Mistake 0xC0050003: BROM Error: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
    • 1.68 Error 0xc002002A: BROM Error: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)
    • 1.69 Fault 0XFA8: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)
    • 1.70 Error 0x7D5: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
    • 1.71 Error: Boundary Check Failed: rom_end_addr >= next rom begin_addr.
    • 1.72 Mistake 3179: BROM Fault: S_CHIP_TYPE_NOT_MATCH (3179)
    • 1.73 Error 5073: BROM ERROR: S_DL_READ_PT_FAIL (5073)
    • 1.74 SP Flash Tool force-closes when scatter file is loaded
    • i.75 Storage type mismatch!
    • ane.76 Error 8045: No Valid Partition Management Table (PMT) for storage
    • 1.77 Error 1041: BROM ERROR: S_CHKSUM_ERROR (1041)
    • one.78 Mistake 6126: BROM ERROR: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE CODE: 0x00
    • i.79 Fault 6128: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR Code: 0X00
    • i.80 Error 0xC0050005: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)
    • 1.81 Error (3): BROM ERROR:?? (3)
    • 1.82 Error 6104: BROM Error: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP Mistake CODE: 0X00
    • i.83 Error 3183: BROM Mistake: S_CHIP_TYRE_NOT_MATCH (3183)
    • 1.84 Mistake 0xC0060001: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
    • 1.85 Error: PMT changed for the ROM; it must be downloaded
    • 1.86 Fault 6004: Fault: S_SECURITY_SLA_FAIL (6004), MSP ERROE CODE: 0X00
    • 1.87 Error 6045: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045), MSP ERROE Code: 0x00
    • ane.88 Fault 2035: BROM Fault: S_BROM_CMD_JUMP_DA_FAIL (2035)
    • 1.89 Error 0x412: BROM Mistake: S_TIMEOUT (0X412)
    • 1.90 Error 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE Code: 0x00
    • 1.91 Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]
    • ane.92 Error 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)
    • 1.93 Error 0xC52: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)
    • 1.94 Error 0XFAA: BROM ERROR: S_FT_FORMAT_FAIL (0XFAA)
    • 1.95 Error 5072: ERROR: S_DL_WRITE_PT_FAIL (5072)
    • 1.96 Error 0xC0070004: Mistake: STATUS_DA_HASH_MISMATCH (0xC0070004)
    • 1.97 Error 6046: BROM ERROR: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Fault Code: 0X0
    • 1.98 Error 0XC0060003: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
    • 1.99 Error 0x94010000: CHIP TYPE Not match! target refuse value: 0x94010000
    • 1.100 Error 0xC0020029: BROM ERROR: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)
    • 1.101 Error 5000: BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY (5000)
    • one.102 Error 0xC002002C: Error: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)
    • 1.103 Error 0xC0030012: ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)
    • one.104 Error 0xC0060005: Mistake: STATUS_BROM_CMD_FAIL (0xC0060005)
    • 1.105 Error viii: ERROR: ?? (eight)
    • 1.106 Mistake 0xC0030001: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001)
    • 1.107 Error: Partition[nvram] should Not gear up "is_download" to true in scatter file
    • 1.108 Error 0xC0050001: Fault: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
    • 1.109 Error 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)
    • 1.110 Fault 5014: Error: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)
    • 1.111 Error 0x7F3: BROM ERROR: S_BROM_CMD_JUMP_DA_FAIL
    • ane.112 Mistake 3154: BROM Mistake: S_DA_SDMMC_WRITE_FAILED (3154)
    • ane.113 Error 0xC0010005: BROM ERROR: STATUS_PROTOCOL_ERR (0xC0010005)
    • 1.114 Error 0xC0010007: BROM ERROR: INSUFFICIENT_BUFFER (0xC0010007)
    • one.115 Error 0xC0050007: Error: STATUS_READ_DATA_EXCEPTION (0xC0050007)
    • 1.116 Fault 0x13CD: BROM Error: S_DL_PMT_ERR_NO_SPACE (5069)
    • 1.117 Error: LIB DA not match, please re-select DA or ask for help
    • 1.118 Mistake -1073283068: BROM Fault: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE CODE: 0X00
    • 1.119 Mistake 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)
    • 1.120 Fault 3152: S_DA_SDMMC_CONFIG_FAILED (3152)
    • one.121 Fault 0xC0020006: Mistake: STATUS_SEC_PL_VFY_FAIL (0xC0020006)
    • 1.122 Error 0xC0030003: Fault: STATUS_DA_SELECTION_ERR (0xC0030003)
    • 1.123 Fault 0xC0030008: Mistake: STATUS_INVALID_GPT (0xC0030008)
    • 1.124 Error 0xC0050004: Fault: STATUS_UPLOAD_EXCEPTION (0xC0050004)
    • ane.125 Error 0x1: ERROR: ?? (0x1)
    • one.126 Error 0xC0030004: ERROR: STATUS_PRELOADER_INVALID 0xC0030004
    • 1.127 Error 1003: ERROR: S_INVALID_BBCHIP_TYPE (1003)
    • 1.128 Error 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
    • 1.129 Error 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)
    • 1.130 Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Where to Download SP Wink Tool Latest and Older Versions?

Download the latest and older versions of the SP Wink Tool from Get SP Wink Tool.

How to Ready SP Flash Tool Errors (BROM Error Codes):

SP Flash Tool Failed to enumerate COM Port

This error clearly ways that the Flash Tool has issues finding the COM port on which your device is continued.

Solution:

  1. Make sure to run SP Flash Tool as administrator on your computer. (A viewer suggested this solution, as it helped him fix the failed to enumerate COM Port outcome.)
  2. Connect your sentinel to some other Port and make sure you have USB Drivers installed.
  3. Open "Device Managing director" and find the COM port of the device you connected. Once found, open Flash Tool, click on Options -> COM Port -> Select the COM Port on which you have continued your device.

The device automatically disconnects during flashing

Meaning: Device disconnects as soon every bit the flashing process begins, interrupting the process.

Solution:

  1. Effort a dissimilar USB Cord, USB Port & PC
  2. Hold the Volume Downward or Up push button while connecting the device to the PC for flashing

SP Wink Tool remains at 0%

Solution:

  1. Install necessary MediaTek VCOM drivers on PC.
  2. Employ the latest version of SP Wink Tool - Download

Follow the troubleshooting guide on how to fix the Wink tool Stuck at 0% (waiting) consequence.

Mistake: Initialize besprinkle file failed. Please check the besprinkle file proper noun y'all load is legal

Meaning: SP Wink Tool doesn't take the name of the besprinkle file.

Solution:

  1. Brand certain the besprinkle file was not renamed.
  2. Effort a higher version of SP Flash Tool [Download]

Error: USB device not recognized

This error occurs while you connect your device to the PC. It shows a prompt on the arrangement tray after connecting your device.

Meaning: PC is having trouble communicating with your device (It occurs due to interruption, hardware, or commuter issues).

Solution:

  1. Try a unlike USB String, USB Port, or PC.
  2. Install the latest MediaTek USB drivers on PC.

Mistake: Please select one ROM at least before execution

Meaning: SP Flash Tool fails to recognize that there is an item ticked.

Solution:

  1. Select the Scatter file again and untick all the items which you lot don't want to flash one by one. Don't use the checkbox, which united nations-ticks all the things at once and so checks one past one.

Fault: PRO_INFO: Failed to get PMT info

Pregnant: SP Flash Tool is having problems reading the phone.

Solution:

  1. Apply different PC and USB Cable.
  2. Ensure that the phone is powered off with a charged battery within when connecting.

Notation: Some phones require you to remove the battery while flashing. In this case, Solution 1 is the one y'all should follow.

Fault 1002: S_INVALID_ARGUMENTS

Significant: Invalid Scatter file.

Solution: Load the correct scatter file.

Error 1012: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)

Significant: The version of SP Wink Tool doesn't back up the size(s) of the file(s) in the firmware or ROM.

Solution:

  1. Use the latest version of Wink Tool [Download]

Error 1003: S_COM_PORT_OPEN_FAIL (1003)

Meaning: SP Wink Tool encountered an mistake while communicating with the device via the target port.

Solution:

  1. Connect the device to a different USB Port on the PC
  2. Try different versions of SP Flash Tool [Download]
  3. Try using unlike USB Cable
  4. Make certain the device'due south USB port is not damaged

Mistake 1013: BROM Error: S_COM_PORT_OPEN Fail (1013)

Meaning: SP Flash Tool encountered an error while communicating with the device via the target port.

Solution:

  1. Connect the device to a different USB Port on the PC
  2. Attempt different versions of SP Wink Tool [Download]
  3. Effort using different USB Cable
  4. Make sure the device'due south USB port is not damaged

Error 1011: S_NOT_ENOUGH_STORAGE_SPACE

Significant: The size of any office of the firmware is larger than the allotted space (ordinarily a cake or cadre)

Solution:

  1. Change the version of the SP Flash Tool. Download from here.

Annotation: It is learned that this error sometimes occurs on the "raw" versions of the flash tool. And then changing the version might help.

Mistake 1022:

Significant: The version of the SP Flash tool is not uniform with your device, or the USB interface is not working.

Solution:

  1. Apply the dissimilar or latest version of SP Flash Tool - Download
  2. Modify USB Cable or USB Port.

Error 1040: S_UNSUPPORTED_OPERATION (1040)

Meaning: Flash boot files & Scatter.txt don't match.

Solution:

  1. Make sure the correct scatter file is loaded.

Error 1042: BROM Error: S_TIMEOUT (1042)

Significant: The flashing process took as well long, and the SP Flash Tool encountered a timeout.

Solution:

  1. Endeavor flashing one file at a time
  2. Apply the latest version of SP Flash Tool [Download]
  3. Use different PC and USB Cable

Mistake two: BROM ERROR: ?? (ii)

Meaning: SP Flash Tool was unable to communicate with the device.

Solution:

  1. Try using a different PC (preferably Windows 7)
  2. Install MediaTek USB Drivers on PC
  3. Use another USB Cable

Error 4008: BROM Fault : S_FT_DOWNLOAD_FAIL (4008)

Meaning: In that location is an interruption between the SP Flash Tool and the device communication, and the SP Flash Tool encountered an error while flashing files.

Solution:

  1. Take out the battery and re-insert it dorsum.
  2. Use different USB Cablevision, Port, and PC.
  3. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack 3 -> Utilize -> OK -> Run flash_tool.exe equally administrator.
  4. Make sure the battery has enough charge left.

Error 2004: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)

Meaning: In that location is an break between the SP Wink Tool and the device advice, and the SP Flash Tool encountered an mistake while flashing files.

Solution:

  1. Accept out the battery and re-insert it back.
  2. Apply dissimilar USB Cable, port, and PC.
  3. Right click flash_tool.exe -> Properties -> Compatibility -> Set up to Windows XP Service Pack three -> Use -> OK -> Run flash_tool.exe equally ambassador.
  4. Make sure the battery has enough charge left.

Mistake 2005: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Significant: Device attempted to power on earlier SP Wink Tool could flash the files to information technology.

Solution:

  1. Take out the battery and re-insert it back.
  2. Use different USB Cable, port, and PC.
  3. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack 3 -> Utilise -> OK -> Run flash_tool.exe as ambassador.
  4. Make sure the bombardment has enough charge left.

Mistake 2020: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)

Meaning: Flash Tool encountered a problem moving files to be flashed to the device's internal SRAM.

Solution:

  1. use the latest version of the SP flash tool [Download Here]
  2. In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
  3. Use the Format all + Download choice
  4. Hold both volume buttons before connecting to the PC for flashing and release in one case flashing begins

Mistake 3001: S_DA_EXT_RAM_ERROR

The SP Wink Tool Error 3001 occurs due to connection issues. Bank check the cable and reconnect to some other port. If it still occurs, try using a different PC.

Error 3012: NAND_FLASH_NOT_FOUND

Pregnant: Problem associated with the definition of flash memory.

Solution:

  1. Use the different version of flash tools - Download
  2. Apply unlike PC, USB Cable, and USB Port.

Error 3140: BROM ERROR: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED

Meaning: SP flash tool encountered an mistake flashing a selected file to a non-specified sectionalisation

Solution:

  1. Use the latest version of SP Wink Tool - Download
  2. Employ format pick and then download in SP Wink Tool

Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)

Meaning: Flash boot files and scatter mismatch. Note EMMC division device and MTD partitioning device use dissimilar TXT boot files.

Solution:

  1. Choose the right Scatter file.
  2. Apply a unlike PC (preferably Windows XP) with all the drivers loaded.

Fault 3149: BROM Mistake : S_DA_SDMMC_WRITE_FAILED (3149)

Significant: SP Flash tool is unable to flash files to the device.

Solution:

  1. Use the latest version of the SP flash tool and run it equally administrator. [Download here]
  2. Format first then Download
  3. Don't tick a box with an unspecified/empty file path
  4. Ensure the phone is switched off and has enough charge before connecting to the PC for flashing
  5. Effort a different PC
  6. Try a different ROM
  7. Try a dissimilar USB cord
  8. Try formatting the phone first earlier flashing files to it

Error 3168: BROM Mistake: S_CHIP_TYPE_NOT_MATCH (3168)

Meaning: SP Flash Tool detects that there is a mismatch between the information provided in the scatter file and the device's info.

Solution:

  1. Make sure yous are using the correct ROM file for your device.
  2. Use the higher version of SP Wink Tool - Download here
  3. Install correct drivers on PC.

Fault 3182: BROM Fault: S_STORAGE_NOT_MATCH (3182)

Meaning: The firmware you are trying to flash is non compatible with your device.

Solution: Try getting the appropriate firmware for your device model.

Error 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)

Meaning: The firmware you are trying to flash is not compatible with your device.

Solution: Try getting the appropriate firmware for your device model.

Error 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)

Significant: The firmware you are trying to flash is not compatible with your device.

Solution: Try getting the advisable firmware for your device model.

Error 4001: S_FT_DA_NO_RESPONSE or Da didn't send response data to Wink Tool

Meaning: SP Wink Tool facing problem communicating with the device.

Solution:

  1. Use a different USB Port.
  2. Install MediaTek VCOM drivers on PC.
  3. Run Flash_tool.exe every bit administrator.
  4. Use a dissimilar PC (preferably Windows 7 or XP).
  5. Try different USB Cable.

Error 4004: Commuter Fault

Significant: Drivers not found or corrupted.

Solution: Uninstall drivers and re-install them.

Error 4009: S_FT_READBACK_FAIL (4009)

Meaning: SP Flash Tool failed to create a Readback file, possibly due to not plenty space for a file or file cannot be overwritten because it is locked.

Solution:

  1. Use the dissimilar version of SP Wink Tool [Download]
  2. Delete old Readback files

Fault 4010: BROM ERROR : S_FT_FORMAT_FAIL

Meaning: The blocks map in the scatter file doesn't lucifer the device's sectionalization sizes

Solution:

  1. Use the correct firmware for your device model.
  2. Use the latest version of SP Flash Tool [Download]

Fault 4017: BROM Mistake: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)

Pregnant: You're trying to flash a file that has not been candy for flashing via the SP flash tool

Error 4032: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Pregnant: The firmware you're trying to flash is either non uniform with your device or you accept selected the wrong flashing settings

Solution:

  1. Ensure that the firmware you are flashing is fabricated for your device model.
  2. Delete the SP Flash Tool folder and re-extract information technology.
  3. Ensure you tick the boxes for only the files present in the ROM you're nearly to wink
  4. Might have the incorrect driver installed. Uninstall the VCOM, Preloader, and MTK drivers and re-install them.

Error 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL

Meaning: The SP Flash Tool Error Code 4050 occurs when block sizes are not the aforementioned in the PMT and scatter. In general, this error is treated to download all the blocks (one tin can use data enough), then the size in the PMT should switch to the correct.

Solution:

  1. Employ a different version of Flash Tool - Download

Error 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)

Meaning: Wink tool was unable to locate the partitioning you're trying to flash.

Solution: United nations-tick any particular with a blank or empty location

Mistake 5002: S_INVALID_DA_FILE

Significant: The Download Agent (DA) file selected is not compatible. DA file is attached to the Flash Tool release, so choose the one which is provided in the Wink Tool binder.

Solution:

  1. Choose the DA file from the SP Flash Tool folder.

Fault 5007: BROM Fault : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Significant: You're trying to flash a file with the unspecified path (no file selected in the item box)

Solution:

  1. Make sure the scatter file is in the aforementioned folder where the other files to be flashed are located.
  2. Untick whatsoever particular whose file you lot do non have or whose path is not specified.

Error 5054: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Pregnant: The files you are trying to flash are not compatible with the device.

Solution:

  1. Ensure yous are using the right files.

Error 5069: BROM Fault : S_DL_PMT_ERR_NO_SPACE (5069)

Significant: The size of a file is larger than the available partition size.

Solution:

  1. Ensure that you are flashing the correct files to the device.
  2. Endeavor another ROM.

Error 5056: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5056)

Meaning: The size of a file is larger than the available partition size.

Solution:

  1. Ensure that you lot are flashing the correct files to the device.
  2. Try some other ROM.

Error 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR

Meaning: Wrong files. The Scatter file of the chosen folder is not even so prepared for the FT files.

Solution:

  1. Cull the correct besprinkle file prepared for the FT files.

Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)

Meaning: When you cull the wrong file, for example, another type of wink downloads into the current flash, the tool will warn with this message. The called flash files are not compatible with your device.

Error 6010: BROM Error: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDEN

Meaning: The device has a protected or locked bootloader.

Solution: Unlock the bootloader on your device.

Error 6012: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP Fault CODE: 0X00

Meaning: The Download-Agent existence used is incompatible with the device.

Solution: Set Download-Amanuensis to MTK_AllInOne_DA.bin

Error 6047: BROM Error: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL

Meaning: Hash (integrity) cheque of the files being flashed failed.

Solution:

  1. Use SP Flash Tool V5.1516.00 from here
  2. Select the right Download Agent file
  3. Navigate to Options > Choice > Download and untick DA DLL All…

Error 6124: BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR Lawmaking: 0X00

Meaning: Wrong wink settings or firmware.

Solution:

  1. Use the correct firmware for your exact device model
  2. Select the correct Download Agent file in the SP flash tool
  3. Become to Options > Choice > Connection > USB Speed > Total Speed
  4. Get to Options > Option > Download > Untick DA DL All with Checksum

Error 8038: Error 8038! Android download pmt is set up, and layout has been inverse / PMT changed for the ROM

Meaning: SP Wink Tool is having trouble writing to certain partitions due to some incompatibility.

Solution:

  1. Format the phone in the SP flash tool (Practise not format bootloader) then try flashing the files over again using Download
  2. If Download doesn't work then do a firmware upgrade
  3. If the MTK backup contains more than 1 besprinkle file, retry flashing with the other scatter file.
  4. If that isn't feasible, try formatting start or employ the firmware upgrade
  5. If that doesn't work, open the besprinkle file using Notepad++ and change __NODL_FAT to Fat by removing "__NODL_".

Error 8100:

Meaning: Cannot find the USB port.

Solution:

  1. Install the Drivers. If already installed, uninstall them and re-install them again.

Error 8200:

Meaning: Invalid file or incompatible recovery file.

Solution:

  1. Discover the right recovery file.
  2. Use the latest version of the SP Wink Tool. [Download Here]

Error 8406: SP FLASH TOOL Fault (8406)

Significant: Compatibility issues.

Solution:

  1. Flash the right firmware for your exact device model.
  2. Update VCOM drivers.

Mistake 8417: BROM ERROR: Initialize scatter file failed. Please check the scatter file name yous load is legal

Significant: The format of the Besprinkle file is invalid.

Solution:

Open the scatter file in Notepad++, the first line must beginning with:

############################################################################################################## General Setting #

If there is anything else above this so delete it and save the besprinkle file.

Stuck at Download DA 100%

Meaning: SP Flash Tool is having trouble communicating with your device.

Solution:

  1. Uninstall and re-install MediaTek drivers.

SP Flash Tool flashing process was successful, simply the phone's calibration doesn't work

If, after flashing the files using SP Flash Tool soft keys and bear on doesn't piece of work or answer, follow the below solution.

Solution:

Edit the besprinkle file using Notepad++ and remove the NODL_ (or set is_download: false to is_download: true) in front of the items yous accept in the backup folder only aren't listed when yous load the scatter file in the SP flash tool. Removing NODL_ or setting is_download to true makes the item listed/available in the SP flash tool when you load the scatter file subsequently saving it.

USB device not recognized

Pregnant: The PC is having problem communicating with your device because of break, hardware, or driver problem.

Solution:

  1. Remove and install the MediaTek MTK drivers again on your PC.
  2. Attempt a different USB cable.
  3. Connect the device to a unlike USB Port.
  4. If the above solutions don't piece of work, attempt using another PC.

Error 0xFDA: BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)

Meaning: SP Wink Tool encountered an mistake reading your device's storage.

Solution:

  1. Endeavor a dissimilar USB cablevision.
  2. Connect the device to a dissimilar USB Port.
  3. If the to a higher place solutions don't work, try using some other PC.

Error 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

Meaning: The firmware you are trying to flash is either not compatible or you have selected the incorrect flashing settings.

Solution:

  1. Make sure that the firmware you are trying to flash is actually for your device model.
  2. Simply tick the boxes only for the files which are available in the ROM folder you lot're trying to flash.

Fault 0x3: BROM Fault:?? (0x3)

Meaning: SP flash tool encountered an error maintaining the connection with the device during the flashing process.

Solution:

  1. Uninstall and re-install MTK VCOM drivers on your PC.
  2. Effort a unlike USB cable.
  3. Connect the device to a dissimilar USB Port.
  4. If the higher up solutions don't work, try using another PC.

Error 0x7D4: BROM Error: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)

Significant: SP Flash Tool encountered an error writing to the device.

Solution:

  1. Try irresolute the Download Agent (Secure Boot DA) file.
  2. Use the latest version of SP Flash Tool – Download here.
  3. Make sure that your device's bombardment is sufficiently charged.
  4. Make sure the device'due south USB port is not damaged.
  5. Ensure that the file names friction match what's in the scatter file.
  6. Try a different USB cable.
  7. Connect the device to a dissimilar USB Port.
  8. If the above solutions don't work, endeavor using another PC.

Error 0x8: BROM ERROR:?? (0x8)

Meaning: The size of the file you are trying to wink is larger than the partition size.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's verbal model.
  2. Endeavour some other Stock ROM.
  3. Change the phone'southward EMMC fleck.
  4. Try using a different PC.

Error OXFC0: BROM Fault S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you take selected the wrong flashing settings.

Solution:

  1. Ensure that the files yous're trying to wink are actually for your device's exact model.
  2. Only tick the boxes only for the files which are bachelor in the ROM you lot're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Use the latest version of the Smartphone Flash Tool.
  5. Delete the SP Flash Tool folder and re-excerpt it.
  6. Ensure that the telephone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the above solution doesn't piece of work, and then you can effort property down the Volume Down button and connect the phone to the PC. You tin can as well try holding Volume Up, Ability and Volume Down, Power, and Book Upward buttons.
  8. Format the phone from Settings earlier trying to flash the files again.

Error 0X411: BROM Mistake: S_CHKSUM_ERROR (0X411)

Meaning: There was a checksum error when flashing the firmware.

Solution:

  1. Delete whatever file with the checksum in its name from the ROM/firmware folder.
  2. Become to Options > Option > Download > Un-tick DA DL all with checksum.

Error 0xFA1: BROM ERROR: S_FT_DA_NO_RESPONSE (0xFA1)

Meaning: SP flash tool encountered an mistake communicating with the device.

Solution:

  1. Install MTK VCOM drivers on your PC. If already installed, uninstall and re-install them.
  2. Ensure that the device is powered off and has charged battery inserted.
  3. Practice not hold any button when connecting the device to the PC for flashing.
  4. Try a different USB cable.
  5. Connect the device to a unlike USB Port.
  6. If the above solutions don't piece of work, try using another PC.

TOOL DL image Neglect!

Meaning: DA DL all with the Checksum selection, is disabled in the SP flash tool.

Solution:

  1. In SP Flash Tool, navigate to Options > Option > Download > Tick DA DL all with checksum and re-flash the firmware.

Error 0xFC0: BROM Mistake: S_FT_ENABLE_DRAM_FAIL (0xFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's exact model.
  2. Only tick the boxes only for the files which are bachelor in the ROM you're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Use the latest version of the Smartphone Flash Tool.
  5. Delete the SP Flash Tool folder and re-excerpt it.
  6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the to a higher place solution doesn't piece of work, then you can try holding down the Volume Down button and connect the telephone to the PC. Y'all tin can likewise try holding Volume UP, Ability and Volume Downwards, Power, and Volume Upwards buttons.
  8. Format the telephone from Settings before trying to wink the files again.

Error 0xC0050003: BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)

Pregnant: SP wink tool encountered an error writing to one or more partitions.

Solution:

  1. Download the latest version of the Smart Telephone Wink Tool and re-flash the firmware.
  2. Endeavor flashing one sectionalisation at a time to figure out which partition is resulting in the error.
  3. Effort a different USB cablevision.
  4. Connect the device to a dissimilar USB Port.
  5. If the to a higher place solutions don't work, try using another PC.

Error 0xc002002A: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)

Significant: The firmware you're trying to flash is either not uniform with your device, or y'all have selected the wrong flashing settings or verified boot is enabled.

Solution:

  1. Unlock the bootloader earlier flashing the firmware.
  2. Ensure that the files you're trying to flash are actually for your device'due south exact model.
  3. Only tick the boxes only for the files which are available in the ROM yous're trying to wink.
  4. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  5. Use the latest version of the Smartphone Flash Tool.
  6. Delete the SP Wink Tool folder and re-extract it.
  7. Ensure that the telephone is switched off (with the bombardment inserted) earlier connecting to the PC for flashing.
  8. If the above solution doesn't work, then yous tin can effort holding downward the Volume Downward button and connect the phone to the PC. You lot can also endeavor holding Volume Upwards, Power and Volume Down, Power, and Volume Upwards buttons.
  9. Format the telephone from Settings earlier trying to flash the files again.

Error 0XFA8: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)

Meaning: SP flash tool encountered an mistake while attempting to flash the firmware.

Solution:

  1. Make sure that the device is switched off, and the bombardment is in the device before connecting for flashing.
  2. Utilize the format option and and so download it in the SP flash tool.
  3. Endeavour changing the Download Agent setting in Smartphone Flash Tool.
  4. Endeavour a different USB cable.
  5. Effort connecting the device to a different USB Port.
  6. Endeavour using a different PC.

Error 0x7D5: BROM Mistake: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

Meaning: The device attempted to ability on earlier the SP flash tool could wink the files to it.

Solution:

  1. Make sure the battery is sufficiently charged on your device.
  2. Have out and re-insert the battery.
  3. Try using a unlike USB cable or COM port or PC.
  4. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe as administrator.
  5. Do not hold whatsoever button when connecting to the PC.

Fault: Boundary Check Failed: rom_end_addr >= next rom begin_addr.

Meaning: The firmware has a division that wasn't included while backing upwardly the firmware. SP Flash Tool encountered an mistake in the end address of the preloader partition and the begin accost of the PGPT partition (i.e., the segmentation which wasn't included in the backup).

Solution:

  1. Close the fault message and manually select the location of all the files in the scatter file from the lesser to the superlative. Meaning that a preloader would be the terminal thing you will select.
  2. If that doesn't work, open and modify the scatter file using Notepad++ so change the "boundary_check: True" to "boundary_check: False".

Error 3179: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3179)

Meaning: The firmware you're trying to flash is either not compatible with your device or y'all have selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are really for your device's exact model.
  2. Simply tick the boxes only for the files which are available in the ROM you're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Use the latest version of the Smartphone Flash Tool.
  5. Delete the SP Flash Tool binder and re-excerpt it.
  6. Ensure that the phone is powered off (with the bombardment inserted) earlier connecting to the PC for flashing.
  7. If the above solution doesn't work, and so you tin attempt holding downward the Volume Down button and connect the phone to the PC. You can also try holding Volume Upwardly, Power and Volume Down, Power, and Volume Upward buttons.
  8. Format the phone from Settings before trying to flash the files again.

Error 5073: BROM ERROR: S_DL_READ_PT_FAIL (5073)

Meaning: Smartphone wink tool encountered an error while trying to format the device.

Solution:

  • Use "download only" under the download tab to flash the firmware, and then you lot can format the device if needed.

SP Wink Tool force-closes when scatter file is loaded

Meaning: SP Flash Tool doesn't support the scatter file considering of its blocks or configuration.

Solution:

  • Open the scatter file using Notepad++ and locate the final partition on the listing (flashinfo) and change the is_download: true to is_download: false. One time washed, save the scatter file and reload it in SP Flash Tool.

Storage type mismatch!

Message:

scatter storage type is HW_STORAGE_EMMC

target storage blazon is HW_STORAGE_NAND

(or)

scatter storage type is HW_STORAGE_EMMC

target storage type is HW_STORAGE_NONE

Meaning: At that place is a mismatch betwixt the device's storage type and that which the scatter file expects.

Solution:

  1. Endeavor using a dissimilar firmware or ROM.
  2. Try using SP Flash Tool version 3.10. If it doesn't work, try using dissimilar versions and make sure to run it every bit administrator.

Fault 8045: No Valid Partition Direction Table (PMT) for storage

Meaning: SP Flash Tool failed to place the device's partition ahead of the file writes.

Solution:

  • Try flashing the firmware using Download only.

Fault 1041: BROM ERROR: S_CHKSUM_ERROR (1041)

Meaning: There was a checksum mistake when flashing the firmware.

Solution:

  1. Delete whatsoever file with the checksum in its name from the ROM/firmware binder.
  2. Go to Options > Option > Download > Un-tick DA DL all with checksum.

Error 6126: BROM ERROR: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE CODE: 0x00

Pregnant: The ROM contains a checksum file, but DA DL All With CheckSum is un-checked.

Solution:

  • Tick DA DL All With Cheque Sum under Options > Option > Download.

Error 6128: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP Fault Lawmaking: 0X00

Meaning: The ROM contains a checksum file, but DA DL All With CheckSum is united nations-checked.

Solution:

  • Tick DA DL All With Bank check Sum nether Options > Option > Download.

Fault 0xC0050005: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Meaning: The firmware you lot're trying to flash is either non compatible with your device or y'all take selected the wrong flashing settings.

Solution:

  1. Ensure that the files you're trying to wink are actually for your device's verbal model.
  2. Merely tick the boxes but for the files which are available in the ROM you're trying to flash.
  3. Brand sure your device's battery is sufficiently charged.

Error (3): BROM Fault:?? (three)

Pregnant: There is a problem with the format of the besprinkle file or files existence flashed. Case – trying to flash .bin files using SP Flash Tool.

Solution:

  • Cheque the scatter file and firmware files you are trying to flash to make sure that they're not meant to exist flashed using a different tool.

Mistake 6104: BROM Error: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP Fault CODE: 0X00

Meaning: Incorrect flash settings or firmware/ROM files.

Solution:

  1. Make sure you lot have selected the correct Download Agent file in SP Flash Tool and are using the firmware meant for your device's exact model.
  2. Get to Options > Option > Connection > USB Speed > Full Speed.
  3. Become to Options > Option > Download > united nations-tick DA DL ALL with Checksum.

Error 3183: BROM Fault: S_CHIP_TYRE_NOT_MATCH (3183)

Significant: SP Wink Tool believes that there is a mismatch betwixt the information provided in the besprinkle file and device info.

Solution:

  1. Make sure to use the ROM/firmware for the exact device model.
  2. Endeavour using the college version of the SP Flash Tool.
  3. Uninstall and re-install the MediaTek MTK USB Drivers on your PC.

Error 0xC0060001: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)

Pregnant: The device attempted to power on before the SP flash tool could flash the files to it.

Solution:

  1. The device might require a custom Download Amanuensis (DA) to be flashed.
  2. Make sure the battery is sufficiently charged before flashing.
  3. Take out and re-insert the battery.
  4. Attempt using a different USB cable or COM port or PC.
  5. Correct click flash_tool.exe -> Backdrop -> Compatibility -> Fix to Windows XP Service Pack 3 -> Use -> OK -> Run flash_tool.exe as ambassador.
  6. Do not hold any button when connecting to the PC.

Error: PMT inverse for the ROM; information technology must be downloaded

Meaning: The partition tabular array almost to be written (from the scatter file) is unlike from the device'southward current division table layout.

Solution:

  1. Ensure that the scatter file and firmware/ROM files you're trying to flash are for your device'south exact model.
  2. If you're trying to flash only a few files from the firmware, so you need to get the firmware to complement and then flash using download only.
  3. If you lot're trying to flash the complete firmware, then try using the "Firmware Upgrade" option or Format kickoff before the "download only" option.

Error 6004: ERROR: S_SECURITY_SLA_FAIL (6004), MSP ERROE CODE: 0X00

Meaning: The Download Agent file isn't compatible with the device.

Solution:

  1. Try using a dissimilar Download Agent file.
  2. Try using a unlike version of the Smartphone Flash Tool.
  3. Ensure you are using the correct Hallmark file.

Significant: The paradigm files y'all are trying to flash do not contain –sign header.

Solution:

  1. Apply the SP Flash Tool v5.1532.00 – Download hither.
  2. Load the Auth file for the device in the flash tool.
  3. Try flashing a factory-signed firmware.
  4. Flash the unsigned image using the 'Write Memory' tab in SP Flash Tool. To activate the write memory tab, printing 'Ctrl + Alt + V' to enable advanced mode and then click Window > Write Memory.

Error 2035: BROM ERROR: S_BROM_CMD_JUMP_DA_FAIL (2035)

Meaning: SP Flash Tool encountered an error connecting to the device.

Solution:

  1. Ensure that the battery is inserted, and you're not holding whatever button when connecting the device to a PC for flashing.
  2. Uninstall and re-install the MediaTek MTK VCOM Drivers.
  3. Disable whatsoever modem manager or software which might be blocking ports on the PC.
  4. Linux / Ubuntu users, make sure you installed 'libusb-dev' then blacklist Ubuntu'south modem manager (considering it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Error 0x412: BROM Fault: S_TIMEOUT (0X412)

Meaning: SP Flash Tool encountered a timeout when trying to flash, i.east., flashing took long to start or complete.

Solution:

  1. Make sure that files are loaded in SP Flash Tool with a valid location. The location should non be empty.
  2. Try flashing ane file at a time.
  3. Try using a higher version of the Smart Phone Flash Tool.
  4. Un-tick larger files or find smaller alternatives.

Mistake 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE: 0x00

Meaning: SP Flash Tool failed to authenticate the files you are trying to wink.

Solution:

  1. Try another ROM/firmware from a different source.
  2. Become an Auth file for your device model.
  3. For Tecno, Infinix, and Itel devices, use Software Download Tool (Format + Download).

Fault 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]

Meaning: The SP Wink Tool Error Code 0x93AF means that the tool encountered a checksum fault.

Solution:

  1. Open the checksum file using Notepad++ and search for 0x93af and replace it with 0x94ae.
  2. Delete any checksum file from the ROM/firmware files.

Mistake 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)

Meaning: The scatter file has an incorrect format. It has been badly created or modified.

Solution:

  1. Download a dissimilar scatter file that doesn't throw an error in SPFT. Now open the two scatter files using Notepad++, and you will notice that the incorrect besprinkle file has the items slightly shifted to the left. Edit the incorrect scatter file to the aforementioned format as in the working scatter file.
  2. Later on modifying the scatter file using the in a higher place method, use the latest version of SP Wink Tool due east.g., SP Flash Tool v5.1728.
  3. Download some other ROM/firmware from a different source.

Error 0xC52: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)

Pregnant: SP Flash Tool was unable to flash files to the device.

Solution:

  1. Make sure to use the latest version of the SP Wink Tool and run it every bit ambassador.
  2. Format first then Download.
  3. Un-tick the box with an unspecified/empty file path.
  4. Ensure that the bombardment is sufficiently charged and the device is switched off before connecting to the PC for flashing.
  5. Endeavor a different ROM from a different source.
  6. Try formatting the device first before flashing the files.
  7. Endeavor a different USB cable.
  8. Connect the device to a unlike USB Port.
  9. If the above solutions don't work, try using another PC.

Error 0XFAA: BROM ERROR: S_FT_FORMAT_FAIL (0XFAA)

Meaning: The source (firmware) doesn't properly match with the target (phone).

Solution:

  1. Try using a unlike firmware for your device model.
  2. Ensure you're using the right tool for flashing the firmware.

Error 5072: Mistake: S_DL_WRITE_PT_FAIL (5072)

Meaning: SPFT encountered a problem writing to 1 or more partitions.

Solution:

  1. Make certain the device is powered off with a charged battery inside earlier connecting to the PC for flashing.
  2. Don't concord any buttons when connecting to the PC.
  3. Try a dissimilar USB cable.
  4. Connect the device to a different USB Port.
  5. If the above solutions don't piece of work, try using some other PC.

Error 0xC0070004: Fault: STATUS_DA_HASH_MISMATCH (0xC0070004)

Meaning: Hash (integrity) check for the images being flashed is failed.

Solution:

  1. Apply SP Flash Tool v5.1516.00 – Download from hither.
  2. Brand sure to select the correct Download Amanuensis file.
  3. Navigate to Options > Selection > Download > Un-tick DA DL all with checksum.

Error 6046: BROM Mistake: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Fault CODE: 0X0

Significant: The SP Wink Tool Error Lawmaking 6046 refers to the failed signature verification for the firmware files.

Solution:

  1. Select MTK_AllInOne_DA.bin as Download Amanuensis file.
  2. Navigate to Options > Option > Download > Un-tick DA DL all with Checksum.
  3. Delete any checksum file in the ROM/firmware folder.

Mistake 0XC0060003: Mistake: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Meaning: Smart Phone Flash Tool is unable to read or write to the device using the selected Download Agent.

Solution:

  1. The device might require a custom Download Agent (DA) to be flashed.
  2. Make sure the bombardment is sufficiently charged earlier flashing.
  3. Take out and re-insert the battery.
  4. Try using a different USB cablevision or COM port or PC.
  5. Correct click flash_tool.exe -> Properties -> Compatibility -> Set up to Windows XP Service Pack three -> Apply -> OK -> Run flash_tool.exe equally administrator.
  6. Do non agree whatever button when connecting to the PC.

Error 0x94010000: Chip Blazon Not match! target refuse value: 0x94010000

Significant: The device probable has a locked/encrypted preloader.

Solution:

  • Un-tick preloader when flashing in SP Wink Tool.

Error 0xC0020029: BROM Fault: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)

Pregnant: Y'all are trying to wink the modified files to a device that accepts only signed or verified images.

Solution:

  1. Download and flash the official firmware for your device (usually have –verified or –signed prefixes in their filename).
  2. If possible, unlock the bootloader of your device and then try re-flashing.

Mistake 5000: BROM Fault: S_AUTH_HANDLE_IS_NOT_READY (5000)

Meaning: The device has a secure boot/bootloader.

Solution:

  1. You will need an Auth (*.auth) file or custom Download Amanuensis (DA) file for the device to proceed with flashing using SP Flash Tool.
  2. For Tecno, Infinix, and Itel devices, apply Software Download Tool (Format + Download).

Error 0xC002002C: Fault: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)

Meaning: The device has a verified boot.

Solution:

  • Download and flash the official firmware for your device (usually take –verified or –signed prefixes in their filename).

Fault 0xC0030012: ERROR: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)

Meaning: The device has a secure kicking.

Solution:

  • You volition demand an Auth (*.auth) file or custom Download Agent (DA) file for the device to go on with flashing using SP Flash Tool.

Error 0xC0060005: Error: STATUS_BROM_CMD_FAIL (0xC0060005)

Meaning: The device attempted to ability on before the SP Flash Tool could flash files to it.

Solution:

  • You will demand a custom Download Agent (DA) file for your device model.

Mistake viii: ERROR: ?? (viii)

Significant: The size of a file is larger than the available partition size.

Solution:

  1. Make certain that the firmware files you lot are trying to flash are really for your device's exact model.
  2. Effort some other Stock ROM from a different source.
  3. Change the device'due south EMMC chip.
  4. Try using a different PC.

Error 0xC0030001: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001)

Meaning: SP Wink Tool cannot recognize the scatter file or the location of the scatter file.

Solution:

  1. Rename the folder location of the scatter file, including the parent folders likewise, and remove all special characters / not-English characters from the folder name.
  2. If that doesn't work, then create a new folder on your desktop and copy ONLY the firmware files to the new binder and then retry flashing the contents from the new folder.

Fault: Partition[nvram] should Not gear up "is_download" to true in scatter file

Meaning: The scatter file specifies to download NVRAM but doesn't specify a file name for NVRAM. This error is common in later versions of the SP Wink Tool.

Solution:

  1. Change the besprinkle file using notepad++ and add together a file proper name for the NVRAM sectionalisation. e.chiliad., "file_name: nvram.bin" then save and ensure there's a nvram.bin file in the same folder as the scatter file.
  2. If that doesn't work, change the besprinkle file using notepad++ and set "is_download: false" for the NVRAM segmentation.

Error 0xC0050001: Error: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)

Pregnant: The firmware you are trying to wink is either not compatible or you accept selected the wrong flashing settings.

Solution:

  1. Brand sure that the firmware you are trying to flash is actually for your device model.
  2. Simply tick the boxes only for the files which are available in the ROM folder you're trying to flash.
  3. Uninstall and re-install MediaTek Preloader VCOM USB Drivers.

Fault 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)

Meaning: The device has a verified boot.

Solution:

  • Download and flash the official firmware for your device (usually have –verified or –signed prefixes in their filename).

Error 5014: Fault: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)

Meaning: The scatter file was badly created or modified, depending on how you obtained the scatter file.

Solution:

  • Input the correct values for all "physical_start_addr" in the scatter file. The exact value for "physical_start_addr" is the same every bit the value of "linear_start_addr".

Mistake 0x7F3: BROM Fault: S_BROM_CMD_JUMP_DA_FAIL

Pregnant: SP Flash Tool is having problem communicating with the device.

Solution:

  1. Ensure that the battery is inserted, and you're not belongings whatever button when connecting the device to a PC for flashing.
  2. Uninstall and re-install the MediaTek Preloader Drivers.
  3. Disable any modem manager or software which might be blocking ports on the PC.
  4. Linux / Ubuntu users, make sure you lot installed 'libusb-dev' then blacklist Ubuntu's modem manager (because it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Error 3154: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3154)

Meaning: SP Flash Tool Error Code 3154 means that the flash tool is having trouble flashing files to the device.

Solution:

  1. Make sure to employ the latest version of the SP Flash Tool and run it as administrator.
  2. Format offset then Download.
  3. Un-tick the box with an unspecified/empty file path.
  4. Ensure that the battery is sufficiently charged and the device is switched off before connecting to the PC for flashing.
  5. Try a different ROM from a different source.
  6. Try formatting the device outset before flashing the files.
  7. Try a different USB cablevision.
  8. Connect the device to a unlike USB Port.
  9. If the above solutions don't work, effort using another PC.

Error 0xC0010005: BROM Mistake: STATUS_PROTOCOL_ERR (0xC0010005)

Meaning: SP flash tool is having trouble communicating with the device.

Solution:

  • Make sure that the telephone is switched off with the battery inserted before connecting to the PC for flashing.

Fault 0xC0010007: BROM Fault: INSUFFICIENT_BUFFER (0xC0010007)

Meaning: SP Wink Tool seems to be blocked from flashing files to the device.

Solution:

  • If you lot can boot your device into Fastboot Mode, so unlock the bootloader and then try flashing again.
  • Un-tick OEM and then retry flashing.

Error 0xC0050007: Fault: STATUS_READ_DATA_EXCEPTION (0xC0050007)

Meaning: SP Flash Tool is unable to readback from the connected device. This mistake usually occurs, especially when the readback length is too large.

Solution:

  1. Download and install updated MTK drivers on your PC.
  2. If you're performing a readback, endeavour skipping cache and userdata.

Error 0x13CD: BROM Mistake: S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the available partitioning size.

Solution:

  1. Make certain that the firmware files you are trying to flash are actually for your device'south exact model.
  2. Effort some other Stock ROM from a different source.
  3. Alter the device'due south EMMC chip.

Error: LIB DA not match, delight re-select DA or inquire for assist

Pregnant: SP Flash Tool is having trouble using the selected Download Agent (DA) file.

Solution:

  1. Un-tick "Cheque LIB DA match" from the SP Flash Tool general settings (Options > Selection).
  2. Try another version of the SP Flash Tool.

Error -1073283068: BROM ERROR: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE Code: 0X00

Significant: The Download Agent (DA) file selected isn't uniform.

Solution:

  • Endeavor using Download Agent (DA) + Auth file + Manufactory ROM.

Error 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)

Meaning: The device likely has a protected preloader or bootloader.

Solution:

  • Un-tick preloader when flashing in SP Flash Tool.

Error 3152: S_DA_SDMMC_CONFIG_FAILED (3152)

Significant: The device likely has a protected preloader or bootloader.

Solution:

  • Un-tick preloader when flashing in SP Flash Tool.

Fault 0xC0020006: Mistake: STATUS_SEC_PL_VFY_FAIL (0xC0020006)

Significant: The device probable has a protected preloader or bootloader.

Solution:

  1. Try using a signed ROM/firmware.
  2. Try unlocking the bootloader before flashing.

Error 0xC0030003: ERROR: STATUS_DA_SELECTION_ERR (0xC0030003)

Meaning: The Download Agent (DA) file selected is incompatible.

Solution:

  1. Try using a different Download Agent file.
  2. Try using Download Agent (DA) + Auth file + Factory ROM.
  3. Try using a different version of the Smartphone Wink Tool.
  4. For Tecno, Infinix, and Itel devices, utilise Software Download Tool.

Error 0xC0030008: Error: STATUS_INVALID_GPT (0xC0030008)

Significant: EMMC chip is faulty on the device.

Solution:

  • Change the device's EMMC chip.

Fault 0xC0050004: Error: STATUS_UPLOAD_EXCEPTION (0xC0050004)

Meaning: SP Wink Tool is unable to communicate with the device.

Solution:

  1. Try flashing with/without the battery inserted.
  2. Endeavor a dissimilar USB cablevision.
  3. Connect the device to a different USB Port.
  4. If the in a higher place solutions don't work, try using another PC.

Error 0x1: ERROR: ?? (0x1)

Meaning: SP flash tool is having trouble communicating with the device.

Solution:

  • Try using a custom Download Amanuensis (DA) and Auth file for your device model.

Error 0xC0030004: ERROR: STATUS_PRELOADER_INVALID 0xC0030004

Pregnant: There is a problem with the preloader partition name in the besprinkle file or the flash tool is having trouble communicating with the device.

Solution:

  1. Modify the besprinkle file using Notepad++ and change the partition name to all lower cases. Ex: PRELOADER to preloader or to match the exact file name in the firmware and save the scatter file.
  2. Try holding the volume up or volume down push earlier connecting the telephone to the PC.
  3. If you go an error while trying to format, return to the download tab and tick the checkbox for the preloader, and then return to the format tab and retry formatting.

Error 1003: ERROR: S_INVALID_BBCHIP_TYPE (1003)

Meaning: In that location is a problem with the scatter file.

Solution:

  • Brand sure to utilize SP Wink Tool compatible scatter file.

Fault 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)

Meaning: The SP Flash Tool version yous are using doesn't support your device or chipset.

Solution:

  1. Brand sure y'all are using the latest version of the SP Flash Tool.
  2. Navigate to Options > Option > Un-tick Storage Life Cycle Check.

Error 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)

Meaning: The size of a file is larger than the available sectionalization size, or the file isn't verified or signed.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's verbal model.
  2. Await for different firmware/ROM.
  3. Change the telephone's EMMC bit.
  4. Endeavour using a different PC.

Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Meaning: The SP Flash Tool is having problem connecting with the telephone, or you are flashing the wrong firmware.

Solution:

  1. If you were holding buttons, try flashing without pressing any buttons (vice versa).
  2. Endeavor flashing a unlike firmware or at to the lowest degree the preloader from a different firmware.

These were the list of SP Flash Tool Errors and solutions to prepare them. Exercise share this with your friends on Facebook, Twitter, and other social networking sites, etc., and help them in fixing SP Flash Tool Fault they are facing.

Accept we missed any SP Flash Tool BROM Error? So do allow united states know in the annotate section below.

👇👇Latest Video on YouTube 👇👇

'; } ?>

This page may incorporate affiliate links so we earn a commission. Delight read our chapter disclosure for more than info.

desrochershateref.blogspot.com

Source: https://www.gizmoadvices.com/list-sp-flash-tool-error-codes-solution-fix/

0 Response to "Failed to Lock Variable " for Read Access With Error 0xc0010001 the Variable Cannot Be Found"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel